Abrasive Assembly

TYPICAL APPLICATIONS
PRODUCTS
  • Flap Wheels   • One and Two Component      Epoxy
  • Honing Stones   • Induction Curable Epoxy
  • Abrasive Disks   • Cyanoacrylate Adhesive
PRODUCT
DESCRIPTION
VISCOSITY (MIXED)
LAP SHEAR (AL/AL)
MIX RATIO
CURE TIME
502-04 A/B
High strength room temperature cure epoxy for flap wheel assembly
27,000 cps
>2,500 psi
1 to 1 PBV
1 Hour

503-18 A/ 600-92 B
High peel strength room temperature cure epoxy
35,000 cps
>2,500 psi
1 to 1 PBV
4 Hours
504-78
Very low viscosity one component heat cure epoxy
3,000 cps
>2,500 psi
N/A
30 min @ 160°C
702-98
High strength non-sag one component
Paste
>3,200 psi
N/A
 10 min @ 160°C

A 400-76-1 Type

High performance one component for metal button disposable disk constructions
40,000 cps
>4000 psi
N/A
30 min @ 120°C
Induction Cure Epoxy
High performance induction curable one component for metal button disposable disk constructions
40,000 cps
>3,000 psi
N/A
1-2 min
Cyanoacrylate
High performance one component for plastic button disposable disk constructions
500-5,000 cps
>2,000 psi
N/A
2-5 min